In case of doubts contact our team of professionals.
Hiperclor 60
HIPERCLOR 60 is an organic chlorine compound recommended for the treatment of pools.
Some of its major characteristics are:
- Low levels of insoluble products
- HIGH solubility
- Does not form calcium incrustation on pipeline and equipment
Hiperclor 60 reaches stabilization within 3 to 4 weeks after initial dose, when stabilizers contained in Hiperclor 60 reach a level of 25 to 30 PPM. By reaching this stabilization level, chlorine consumption will drop by half of the initial dosage, or less, depending on factors like: frequency, contamination levels, water temperature, etc.
The use of Hiperclor 60 maintains residual free chlorine tenor stable between 1 and 3 PPM during the whole day, protecting the water of your pool, which does not occur with the products without stabilizers. Hiperclor 60 provides a greater economy.
INITIAL DOSING FOR STABILIZATION
- Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's Hidro pH Stable.
- Adjust the calcium hardness between 100 and 250 PPM using the Pooltest 4 in 1 and the Hidrocalcium product.
- Maintain water alkalinity between 7,2 and 7,6.
- Add 3 grams of Hiperclor 60 per cubic meter of water daily, always at dawn.
- Dissolve Hiperclor 60 in a clean plastic container with water and spread the solution over the pool. If preferred, spread the powder directly over the swimming pool surface.
- Measure the residual chlorine at dawn with the help of a Test Kit, and add or subtract the total dosage in order to obtain 1 to 3 PPM.
- After 3 to 4 weeks, the result of the measured residual chlorine should be more than 1 PPM, resulting in the stabilization of the water, thus giving the possibility of reducing the dosage of chlorine to approximately 1,5 grams per cubic meter of water, as described in: Daily Dosage
- Important: If the water is subject to sudden and frequent variation of pH, use the HidroAll's Hidro pH Stable as recommended in the Alkalinity Test Kit. The pH Stabilizer prevents frequent pH oscillation, reducing the necessity of pH correction, resulting in less chlorine waste. Check and correct the Total Water Alkalinity once every 30 days.
ROUTINE DOSAGE
- Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's Hidro pH Stable
- Add 2 grams of Hiperclor 60 per cubic meter of water daily, always at dawn.
- Dissolve Hiperclor 60 in a clean plastic container with water and spread the solution over the pool. If preferred, spread the powder grains directly over the pools surface.
- Measure the residual chlorine at dusk with the help of a Alkalinity Test Kit, and add or subtract the total dosage in order to obtain 1 to 3 PPM.
SHOCK DOSAGE
- Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's PH ESTAVEL.
- After long periods without chlorine or when the water is colorful, cloudy or with and unpleasant odor, adjust the pH between 7,2 and 7,6 and add 15 grams of Hiperclor 60 per cubic meter of water. Repeat the operation if necessary
- Only use the pool when the residual chlorine tenor reaches below 3 PPM
This product is avaliable in the following packages:
- 45 kg plastic bucket - Coarse
- 45 kg plastic bucket - Fine
PRECAUTION AND SPECIAL CARE
- KEEP OUT OF REACH OF CHILDREN AND DOMESTIC ANIMALS
- Maintain product in its original container
- Avoid contact with skin, eyes and clothing. Avoid dust inhalation
- Conserve package in a closed, dry, fresh place
- Wash objects and utensils after using them as a measuring device
- Do not mix with other products, including other pool care products (especially Calcium hypochlorite), since the mixture may react violently resulting in dangerous explosions and chlorine detachment
- Avoid soil and water ways contamination
- Inform responsible environmental protection agency in case of accident
- Do not inhale
IN CASE OF ACCIDENT
In case of contact with the eyes or skin, wash with clean running water abundantly. In case of inhalation, do not induce vomiting and consult immediately a Toxicology Central (for more info call 911) or a doctor taking along the products package. If inhaled in excess, remove the victim to a ventilated area and call 911.
