Hidrosan Plus

Hidrosan Plus is an Organic Dicloro exclusive for HidroAll Inc.

Hidrosan's unique formula (patent required) is the main difference between other industrially produced Dichloro for sale in the pool care market

Hidrosan Plus does not reduce the Total Alkalinity or the pH of the water; therefore, swimming pools treated with Hidrosan Plus remain with balanced water, while swimming pools treated with different products oscillate in water balance

POOL WATER DISINFECTION

Due to its high solubility and neutral pH, Hidrosan Plus is recommended to treat every type of pool, especially swimming pools made of FIBERGLASS or VINYL. HIDROSAN PLUS IS RECOMMENDED FOR FIBRERGLASS OR VINYL SWIMMING POOLS.

Hidrosan Plus contains chlorine stabilizers, which prevents the decomposition of the waters residual free chlorine by the sun. Chlorine stabilization occurs 3 to 4 weeks after initial dose, when stabilizers contained in Hidrosan reach a level of 25 to 30 PPM. By reaching this stabilization level, chlorine consumption will drop by half of the initial dosage, or less, depending on factors like: frequency, contamination levels, water temperature, etc.

The use of Hidrosan Plus maintains residual free chlorine tenor stable between 1 and 3 PPM during the whole day, protecting the water of your swimming pool, which does not occur with the products without stabilizers. Hidrosan Plus provides a greater economy.

INITIAL DOSING FOR STABILIZATION

1. Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's Hidro pH Stable.
2. Adjust the calcium hardness between 100 and 250 PPM using the Pooltest Stripe Kit 4 in 1 and the Hidrocalcium product.
3. Maintain water alkalinity between 7,2 and 7,6.
4. Add 4 grams of Hidrosan Plus per cubic meter of water daily, always at dawn.
5. Dissolve Hidrosan Plus in a clean plastic container with water and spread the solution over the pool. If preferred, spread the multi-color grains directly over the pools surface.
6. Measure the residual chlorine at dawn with the help of a Test Kit, and add or subtract the total dosage in order to obtain 1 to 3 PPM
7. After 3 to 4 weeks, the result of the measured residual chlorine should be superior to 1 PPM, resulting in the stabilization of the water, thus giving the possibility of reducing the dosage of chlorine to approximately 1,5 grams per cubic meter of water, as described in: Daily Dosage
8. Important: If the water is subject to sudden and frequent variation of pH, use the HidroAll's Hidro pH Stable as recommended in the Alkalinity Test Kit. The pH Stabilizer prevents frequent pH oscillation, reducing the necessity of pH correction, resulting in less chlorine waste. Check and correct the Total Water Alkalinity once every 30 days

ROUTINE DOSAGE

1. Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's Hidro pH Stable.
2. Add 1,5 grams of Hidrosan Plus per cubic meter of water daily, always at dawn.
3. Dissolve Hidrosan Plus in a clean plastic container with water and spread the solution over the pool. If preferred, spread the powder grains directly over the pools surface.
4. Measure the residual chlorine at dusk with the help of a Test Kit, and add or subtract the total dosage in order to obtain 1 to 3 PPM.

SHOCK DOSAGE

1. Adjust the Total Alkalinity of the water between 80 and 120 PPM, with the help of the Alkalinity Test Kit and HidroAll's Hidro pH Stable.
2. After long periods without chlorine or when the water is colorful, cloudy or with and unpleasant odor, adjust the pH between 7,2 and 7,6 and add 15 grams of Hidrosan Plus per cubic meter of water. Repeat the operation if necessary
3. Only use the pool when the residual chlorine tenor reaches below 3 PPM

This product is avaliable in the following packages :
- 1 kg plastic bags;
- 2,5 kg, 10 kg and 50 kg plastic buckets

PRECAUTION AND SPECIAL CARE

• KEEP OUT OF REACH OF CHILDREN AND DOMESTIC ANIMALS
• Maintain product in its original container
• Avoid contact with skin, eyes and clothing. Avoid dust inhalation
• Conserve package in a closed, dry, fresh place
• Wash objects and utensils after using them as a measuring device
• Do not mix with other products, including other pool care products (especially Calcium hypochlorite), since the mixture may react violently resulting in dangerous explosions and chlorine detachment
• Avoid soil and water ways contamination
• Inform responsible environmental protection agency in case of accident
• Do not inhale

IN CASE OF ACCIDENT

In case of contact with the eyes or skin, wash with clean running water abundantly. In case of inhalation, do not induce vomiting and consult immediately a Toxicology Central (for more info call 911) or a doctor taking along the products package. If inhaled in excess, remove the victim to a ventilated area and call 911.